Daniel XRT Totalizer

The XRT saves time, money and hassle while delivering user-friendliness in the harshest conditions.

Flow measurement with mechanical flow meters where a precise calculation over the full measurement range is required, or if re-transmission of the flow rate and/or totalizer functions or serial communication is desired. The XRT offers you a flow rate indicator / totalizer designed to be used in harsh and complex applications. Its rugged design and ease of use are unequaled by any other explosion proof indicator in the market. The XRT is always your first and safest choice in explosion
proof applications.

Coming Soon:

Display

Type High intensity transflective numeric and alphanumeric LCD, UV-resistant, with bright backlight. Intensity can be adjusted via the keypad.
Note When battery powered, the backlight is only operational after a keypad touch, to extend battery lifetime.
Dimensions Ø 65 x 45mm (2.56” x 1.77”)
Digits Seven 12mm (0.47”) and eleven 7mm (0.28”) digits. Various symbols and measuring units.
Refresh rate User definable: 8 times/sec. – 30 secs
Speedometer To indicate the actual flow rate the bargraph runs from 0 to 100% in 20 blocks, each block is 5%

Operating Temperature

Ambient -40°C to +70°C (-40°F to +158°F)

Power Requirements

Type PB Long life Lithium battery – lifetime depends upon settings and configuration – up to approx. 3 years
Note PB The battery can power the backlight for a short time after a keypad touch but cannot power the relay output (OR) or the real sensor supply (Terminal P3)
Type PD 9 – 27V DC. Consumption max. 4.5 Watt
Type PX 9 – 27V DC. Consumption max. 3 Watt
Type AH Loop powered, analog output. 11 – 27V DC, Min. 3.5mA. Consumption max. 675mW (25mA @ 27VDC)
Note AH The loop powered analog output cannot power the backlight, mechanical relay output (OR) or the real sensor supply (Terminal P3)

Sensor Excitation

Type AH/PB/PX Terminal S3: 3V DC for pulse signals and 1.2V DC for coil pick-up, Iout max. 100μA
Note AH/PB/PX This is not a real sensor supply. Only suitable for sensors with a very low power consumption like coils (sine wave) and reed-switches
Type PD Terminal P3: 8.2 / 12 / 24V DC 8.2V DC, Iout max. 20mA 12V DC, Iout max. 30mA 24V DC, Iout max. 75mA (this voltage varies depending on the input supply voltage)

Terminal Connections

Type Removable plug-in terminal strip. Wire max. 1.5mm2 and 2.5mm2

Data Protection

Type EEPROM backup of all settings. Backup of running totals every minute. Data retention at least 10 years.
Password Configuration settings and clear total can be password protected.

Directives & Standards

EMC Directive 2014/30/EU, FCC 47 CFR part 15
Low voltage Directive 2014/35/EU
RoHS Directive 2011/65/EU
ATEX / IECEx Directive 2014/34/EU, IEC 60079-0,
IEC 60079-1, IEC 60079-31
FM Class 3600, 3615, 3616, 3810
CSA CSA 22.2 No. 25, No. 30, No. 61010-1-12
UL UL 61010-1
IP & NEMA EN 60529 & NEMA 250

Hazardous Area – Explosion Proof

Ambient Temp -40°C to +70°C (-40°F to +158°F)
ATEX certification Gas: II 2 G Ex d IIC T6 Gb
Dust: II 2 D Ex tb IIIC T85°C Db
IECEx certification Gas: Ex d IIC T6 Gb
Dust: Ex tb IIIC T85°C Db
FM & CSA c-us certification Class I, Div. 1, Grps A, B, C, D
Certification Class II/III, Div. 1, Grps E, F, & G
Class I, Zone 1, AEx d IIc T6 Gb,
Zone 21, AEx tb IIIC T85°C Db

Enclosure – General

Window Glass window
Sealing Silicone
Control keys Three infra-red keys with operation through the glass front window
Rating IP66, IP67 / NEMA Type4X / Type7 / Type9
Dimensions 112 x 133 x 148mm (4.41” x 5.24” x 5.83”) – W x H x D

Enclosure – Types

Type HA_ Aluminum Ex d enclosure
Weight 1550 gr. (3.41 lbs)
Type HS_ Stainless steel 316L Ex d enclosure (Consult factory)
Weight 3600 gr. (9.65 lbs) (Consult factory)

Enclosure – Drillings

Type H_D Entry threads: 2 x 1/2”NPT / 1 x 3/4”NPT
Type H_G Entry threads: 2 x M20 / 1 x M25 (Consult factory)
Type H_H Entry threads: 3 x M25 (Consult factory)
  • Explosion proof according ATEX, IECEx, FM and CSA c-us
  • Displays flow rate, total, acc. total, daily total, previous day total, measuring units and a flow rate indicating speedometer
  • Bright LED backlight
  • Easy K-factor configuration for volumetric or mass
  • 15 point linearization of the flow curve – with interpolation
  • Ability to process all types of signals: Sine wave (coil), NAMUR, NPN/PNP pulse, Reed-switch, Active pulse signals, (0)4 – 20mA
  • Scaled pulse output according to linearized acc. total and input retransmission
  • Loop powered 4-20mA output acc. linearized flow rate
  • Modbus RS232 / RS485 or USB communication
  • Power requirements: Loop powered, battery or 9 – 27V DC
  • Sensor supply: 8.2 / 12 / 24V DC
  • Auto backup of settings and running totals
  • Easy configurable via PC with free downloadable software
  • Data logging of flow rate, total and accumulated total
Line Size DN50 to DN200 (2-in to 8-in)
Fluid Type Liquid
Operating Temperature Range -29º C to +66º C (-20º F to +150º F)
Operating Pressure Range ANSI 150 to 300
Materials: Valve Body Carbon Steel, ASTM A352 GR LCC
Materials: Valve Cylinder DN50 to DN 200 (2-in to 4-in): Stainless Steel, ANSI 150 to 600; DN250 to DN 300 (6-in to 8-in) Carbon Steel, Nickel Coated, ANSI 150 to 600
Materials: Valve Piston Standard: Stainless Steel
Materials: Seat Ring DN50 to DN200 (2-in to 6-in) Stainless Steel; DN300 (8-in) Carbon Steel, Nickel Coated
Materials: O-Rings Standard: Viton; Optional: Neoprene, EPR, Kalrez / Teflon AP (Aggressive Products)